韶山Professional operation steps for table drills

Before operation, it is necessary to be familiar with the performance, purpose, and operating precautions of the machine. It is strictly prohibited for novices to operate the machine alone;

Operators must undergo training, examination, or assessment before being certified to operate;

Operators should wear appropriate clothing, tie their sleeves tightly, and strictly prohibit wearing gloves during operation. Girls should wear safety helmets;

Before starting up, check that the contacts on the power plug and socket are reliable, without any looseness or poor contact;

Check whether the drill wrench and electrical switch are sensitive, and whether the rotating parts are well lubricated;

Before the machine starts working, the handle that should be locked must be tightened, and the workpiece should be clamped reliably;

When drilling brittle metal materials, protective goggles should be worn to prevent chips from injuring people;

When installing or disassembling fixtures, special elastic keys should be used. It is strictly prohibited to directly hit the fixture gears with various metal hard objects to prevent damage to the equipment or injury to people caused by brittle debris;

When drilling, the feed pressure should not be too strong. If the drill bit is not sharp, the workpiece is loose, or the belt is slipping, power should be cut off immediately. After the spindle stops rotating, repair, adjustment, and replacement should be carried out to ensure that it returns to normal before starting work;

During drilling, it is strictly prohibited to wipe the chips with cotton yarn or blow them with your mouth, and it is also not allowed to directly eliminate the chips by hand. Instead, use a brush or iron hook to clean them;

When drilling, if the chips are too long, they should be cut in a timely manner to prevent injury to people;

When drilling close to the drill bit, the pressure must be small to prevent excessive pressure from suddenly drilling through and damaging the drill bit and workpiece;

When drilling, the head should not be too close to the bench drill, and a suitable distance should be maintained;

After completing the work, the power must be cut off and the drilling rig and its surroundings must be cleaned. After using the drilling machine, the power must be cut off and the exposed sliding surfaces and worktable must be wiped clean, and lubricating oil must be added to each sliding surface and lubrication point;

Without the consent of the team, it is not allowed to use the bench drill arbitrarily. This machine is a specialized machinery for dedicated personnel. Non operators are strictly prohibited from starting and operating it. Any consequences resulting from the operator's insistence on operating it will be at their own risk.